Xgfh84-84-20 bottled water production line details:
Overview of bottled water production line
The air feed channel is directly connected with the three-in-one filling machine, and the bottle is transmitted by the whole process of clamping the bottle. The advantages of this method are as follows :(1) changing the bottle shape does not need to adjust any parts, and the bottle shape can be changed only by changing the bottle roller. Greatly facilitate the user's use, save the user's bottle switching costs and time. (2) it can avoid the secondary pollution of the bottle mouth.
Bottling water production line the production process of this machine is as follows: the bottles in the air feed path are transferred to the bottle stamping machine of the three-in-one filling machine by the bottle splicing star wheel and the bottle clip bottle feeding wheel. The turntable of the bottle punching machine is equipped with a clamp-type stainless steel bottle holder. The bottle holder holds the bottleneck and turns 180° along a guide rail to make the bottle holder downward. In the specific area of the bottle punching machine, a special nozzle spurts out water to flush the inner wall of the bottle and the outer wall of the bottle. The bottle is rinsed and drained, then flipped along the guide rail 180° to make the bottle mouth upward under the holder. The cleaned bottle is exported by the bottle stamping machine through the bottle clip transfer wheel and transmitted to the filling machine. The bottle entering the filling machine is held by the bottle clip on the lifting cylinder, and under the action of the CAM, the bottle can rise and fall. The filling machine adopts gravity filling method, the bottle mouth rises and opens the filling valve to start filling, and the filling ends when the material rises to the position of blocking the back hole. After the filling, the bottle mouth drops off the filling valve, and the bottle enters the capping machine through the bottle clip transition roller. The stop knife on the capping machine can jam the bottleneck, keeping the bottle upright and preventing rotation. The capping head keeps revolution and rotation on the capping machine, and under the action of the CAM, the capping, capping and capping can be realized, and the whole capping process is completed. The finished bottle is transferred from the capping machine to the bottle delivery chain through the bottle release roller, and from the delivery chain to the three-in-one filling machine.
The whole machine adopts floor-to-ceiling sealing window, beautiful and generous.